Agni Motors : manufacturers of high efficiency DC motors

Les moteurs Agni Motors sont développés par Cédric LYNCH et spécialement conçu pour les hautes performances.

Pour en savoir plus : http://saiettagroup.com/ (anciennement http://www.agnimotors.com/)

MOTEUR AGNI - A retrouver dans la boutique Kit Elec Shop.

 Doc PDF   rpm/V   V nom   Vmax   I cont@48V   Imax   Vitesse   Pmax   Pnom@48V 
 AGNI 95    71 rpm/V   56 V   60 V   250 A   400 A   3400 tr/min@48V   14 kW   12 kW 
 AGNI 95 RI    71 rpm/V   56 V   72 V   250 A   400 A   5000 tr/min@72V   26 kW   
 AGNI 119    58 rpm/V   68 V      200 A   300 A   2780 tr/min@48V   13,6 kW   8,5 kW 
 AGNI 135    50 rpm/V   80 V      170 A   200 A   2400 tr/min@48V   13,6 kW   7,6 kW 
 AGNI 143    47 rpm/V   86 V      150 A   300 A   2256tr/min@48V   12,9 kW   6,5 kW 

Le moteur AGNI

Concernant le capteur de température du porte balai :

The two small wires coming from the brush holder are connected to a 33k negative-temperature-coefficient thermistor that has a resistance of 15 to 35 Kohms at ambient temperature and about 2 Kohms at the maximum acceptable temperature of the brush holder. In an application where there could be a risk of overloading or overheating, these wires should be connected to the controller circuit in such a way that the maximum current will start to be cut back when the thermistor's resistance falls below 4 to 5 Kohms and will be low enough to prevent further temperature rise when the resistance has fallen to 2 Kohms. The wires can simply be connected in parallel with the throttle potentiometer if it has a two wire connection, and 0 ohms = stop and 5 Kohms = full throttle.

La notice d'entretien du moteur AGNI

Elle est disponible ici sur le site de la société AGNI et également en copie locale (depuis octobre 2011).

Voir aussi : Jozztek 01 - How to recondition an Agni Motor - 95R Armature Removal.

Les dimensions du moteur AGNI

Lien : Fichier PDF, format A3, 421 Ko

Les dimensions du moteur AGNI